Jump to content
Mazdaworld
  • Announcements

    • Synesthesia

      Online source for ALL Mazda OEM parts.

      Original posted by "Anubis"   HAH! forget millenia. it has it for every mazda ever made. (well most )   here is the website:   http://www.trademotion.com/partlocator/ind...p;siteid=214264   enjoy guys.   *Administrative pin - Synesthesia
Sign in to follow this  
Jdubs99

Support For Meet

Recommended Posts

I'm offering to bring any tools necessary to get whatever work done. My toolbox includes 5k of mostly installer tools, but I do have a crawler, jackstands, two jacks, sockets and backups, extensions, spring compressors, angle pliers, ratchets, vice grips, channel locks, impact driver, air tools, torque wrench, mechanics light, heat gun, drill, wire puller, screw-out, pliers, panel removers, hose removal tools, soldering irons, pick tools, small flashlight, etc. List whatever anyone may need, and i'll post if i have it.

Full cadre of electrical connectors, some left over parts from my installer days.


Full complement of auto electrical for any installation and of course my free certified services for the small fee of *This reference banned by MW* smile.gif

Also well versed in removing the orange reflectors from newer Milly headlights and rewiring newer Bose systems.

As long as nothing gets lost, this is my contribution since I'm pretty close.

Side note, getting my tranny cooler and steering column boost gauge installed would be awesome at the meet. smile.gif

Use this as the forum for what everyone would like to do, and what is needed both for wrenching and material wise.

Share this post


Link to post
Share on other sites
hmm.gif this would indeed be very helpful, although I'm not sure whats getting done. I had asked if MTS could install my tranny cooler so I was bringing some ramps and or jacks.

What we need to find out from MC is if there is an area where we can do the work, at certain meets where that was the goal we were chased away.

Share this post


Link to post
Share on other sites
If all else fails, just tell the park rangers our cars won't start. smile.gif

Share this post


Link to post
Share on other sites
Since we are paying guests, I should think we can use the parking lot or the parking space by the cabins.

I will scout out a few locations when I am off on a Saturday.

Rest assured that Momma will take care of her guests.

Share this post


Link to post
Share on other sites
I will not bring my car onto even a flat dirt road, I'm almost 100% committed to bringing the millenia, even if a rain storm is predicted, depending, I will research flood plains and elevation of the area.

Share this post


Link to post
Share on other sites
And if it isn't paved, Caddi will grade and pave. smile.gif

Share this post


Link to post
Share on other sites
We need the low down.... like where the closest parts place is too...

Share this post


Link to post
Share on other sites
and.......

place of local ricer meets.... so we can have a driveby shifty.gif

Share this post


Link to post
Share on other sites
We will sic Tightz on them....

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×