mohamedeladawy@hotmail.com Posted August 9, 2007 Report Share Posted August 9, 2007 i just need to install this JVC KD-G230 in my rx-7. i have wired (to the best of my knowledge) the speakers to the wiring harness given to me by JVC. it has 12 wires in the wiring harness. 8 of em are for the speakers (2 for each speaker) 1 is for the antenna trigger, one for a live terminal, and one for an accessory terminal. (the last wire is for ground). now the antenna wire (JVC calls it a 12V wire or some shit that should be used if u have a motorized antenna) i don't have a problem with. its the two terminal wires. where do i wire them to? i got the wiring diagram for the rx7 and it says in the stereo harness, there is something called the constant voltage wire and a switched voltage wire. i thought maybe those were the ones i splice into but to no avail. i would do it but the head unit would turn on (only when i press the eject button) flash, and then turn back off again. what do u think i should do? i can give u the link to the wiring diagram and also for the JVC instruction manual. maybe u don't have to see it at all. JVC manual: http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf (the wiring diagram is at the last page) Mazda Stereo diagram: http://www.the12volt.com/installbay/stereodetail/1406.html hope this helps. sooo any suggestions as to how to make this thing work? Quote Link to comment Share on other sites More sharing options...
mts Posted August 9, 2007 Report Share Posted August 9, 2007 I am surprised Scosche doesn't make a harness for it... Quote Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted August 9, 2007 Author Report Share Posted August 9, 2007 i cant do harness because the speakers themselves arent integrated into the stock harness. (previous owner...OY!) SOOOO..i had to wire them myself to the JVC harness. Quote Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted August 12, 2007 Author Report Share Posted August 12, 2007 figured it out. thanks to clue. thanks man Quote Link to comment Share on other sites More sharing options...
excluesiveonez Posted August 13, 2007 Report Share Posted August 13, 2007 wut did i do??? can you type the explanation here so i can visualize Quote Link to comment Share on other sites More sharing options...
sirmakesalot Posted August 13, 2007 Report Share Posted August 13, 2007 he used it Quote Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted August 14, 2007 Author Report Share Posted August 14, 2007 u told me what wire to connect with what. after that, i just figured out the rest. sooo... thanks! Quote Link to comment Share on other sites More sharing options...
Troutman Posted November 26, 2007 Report Share Posted November 26, 2007 All's well that ends well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.