01mazda Posted February 2, 2008 Report Share Posted February 2, 2008 Just dont know where i would mount everything thing.... I got a link off of one of the old threads and was going to purchase like a 250 dollar kit but dont know where all that shit will go? Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted February 2, 2008 Report Share Posted February 2, 2008 what kind of kit is it, does it run off the battery, or direct connect. if it runs off the battery then you connect the power to the battery, ground it somewhere, and then connect the remote turn on into the low beam postive of either side (drivers side works best) take out old headlight bulbs, put in hid bulbs CAREFULLY!!! don't bang them around or anything, then mount the ballasts connect wiring to ballasts, connect ballasts to bulbs and your done. I had my ballasts mounted under that fuse box on the passenger side, and inbetween the airbox and high-beam dust cap. If its direct plug and play, take out old bulb, put in HID bulb CAREFULLY!!!! then connect the ballasts into the 9006 sockets on both sides, then connect ballasts to bulbs, and your done. Quote Link to comment Share on other sites More sharing options...
01mazda Posted February 9, 2008 Author Report Share Posted February 9, 2008 what kind of kit is it, does it run off the battery, or direct connect. if it runs off the battery then you connect the power to the battery, ground it somewhere, and then connect the remote turn on into the low beam postive of either side (drivers side works best) take out old headlight bulbs, put in hid bulbs CAREFULLY!!! don't bang them around or anything, then mount the ballasts connect wiring to ballasts, connect ballasts to bulbs and your done. I had my ballasts mounted under that fuse box on the passenger side, and inbetween the airbox and high-beam dust cap. If its direct plug and play, take out old bulb, put in HID bulb CAREFULLY!!!! then connect the ballasts into the 9006 sockets on both sides, then connect ballasts to bulbs, and your done. I know how to hook it up ....was just wondering where everyone mounted the ballasters and shit Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted February 9, 2008 Report Share Posted February 9, 2008 On the drivers side one ballasts fit nicely right inbetween the highbeam dust cap and stock airbox. On the passenger side the best place I have found is under the fuse box. its 1-2 bolts to remove, just take it off, but the ballast securely underneath, put fuse box back on and your good, very secure, safe places. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.