Jump to content

Programming Remote Keyless Fobs


mts
 Share

Recommended Posts

Open drivers door and leave open.

Lock and unlock the drivers door using the power door lock switch on the door.

Insert key into the ignition.

Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position)

Do this 3 times within 10 seconds. Leave key in the ignition

Open and close the drivers door 3 times. (Door should be left open after this step)

ECU should respond by locking and unlocking the doors.

Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

When you're done, remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...