Jump to content

Technical Data


mts
 Share

Recommended Posts

Here should be the most essential info on the KL 2.5 24v engine:

 

Volume: 2497 ccm

Bore x stroke: 84,5 x 74,2

Compression Ratio: 9,2:1

DIN Hp: 165 @ 5600 RPM

Torque Nm: 217 @ 4800 RPM

Valve/valveseat angle: 45/45

Compression, bar: 14,02 (min 9,81, max difference 2,0)

Oil Pressure: 4,9 @ 3000 RPM / min 3,40 @ 3000 RPM

Thermostat opening: 80-84 Celsius

Electrode gap: 1,0-1,1 mm

Firing Order: 1-2-3-4-5-6

Ignition: 10 degrees BTDC +/- 1 @ 650 RPM

Injector Resistance: 12-16 Ohm

Coolant Temp. sensor 20 C / 80 C: 2,2-2,7 KOhm / 0,28-0,35 KOhm

IAT sensor 20 C / 60 C: 2,0-3,0 KOhm / 0,4-0,7 KOhm

Idle speed: ´650 PRM +/- 50

Generator Max Amp: 90A

Cylinder Head tightening sequence:

8 4 1 5

7 3 2 6

Cylinder head tightening torque(oiled):

Step 1: 23-26 Nm

Step 2: 90 deg +/- 5

Step 3: 90 deg +/- 5

Bolt length(max): 135,0mm

Main Bearing Bolts tightening torque: 23-25 Nm (short bolts: 18-21 Nm)

Connecting rod bolts tightening torque: 22-27 Nm + 90 deg + 90 deg

Flywheel Bolts tightening torque: 61-67 Nm Oiled

Camshaft wheels/bearings torque: 123-140 Nm / 11-14 Nm

Spark Plugs: 15-22 Nm

Engine Oil Capacity(incl. filter): 4,0 L

Gearbox oil capacity: 2,7 L

Auto tranny oil capactiy: 8,8 L

Power Steering liquid capacity: 1,25 L

Coolant Liquid Capacity: 7,5 L

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...