///BHRpowered Posted May 2, 2007 Report Share Posted May 2, 2007 Yes, I'm still slowly working on my Jeep q45 gaitling gun retrofit, its underway. This however will be for the millenia. I love my current retrofit, but had decided to take it to the next step. In the coming days parts will be arriving for what will be the greatest retrofit the land has seen. pre 04 infiniti Fx45 bixenon projectors. Gasket color mod, valeo lense swap, shield crafting, solonoid resistor installed, quicker shutter action without the strain. powered by philips 4300k capsules and auserwald 55w boost ballasts. Will run at 35w normally, whenever the hibeams are engaged the shield will flip to the hisetting and ballasts will bump power up to 55w, about 20% increase in light output. I will also be mounting a custom switch to boost the lowbeams on command to full power. I don't think these projectors are going to fit in even my housings which do not have the millenia reflector to begin with, but I have a few tricks up my sleeve. This is my expected output at 35w. Pictures are at a distance of 80ft, these will be about the 2nd widest bixenon projector beam output in the world, sharp color, and amazing cutoff. Those are full size delivery doors, estimated width at this distance is 125ft, or 11 lanes of traffic Quote Link to comment Share on other sites More sharing options...
Dallasaurora Posted May 3, 2007 Report Share Posted May 3, 2007 Other drivers will love you for it, I guess. Quote Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted May 3, 2007 Report Share Posted May 3, 2007 u finally bought a regular camera. good for u. all i can say about that is THATS ONE DARN BRIGHT LIGHT BULB U GOT THERE SONNY Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted May 3, 2007 Author Report Share Posted May 3, 2007 HA, I did no such thing, this is expected output, it is the same projector and custom setup for someone on hidplanet, I will never get more then a camera phone, hear me, NEVER!!. and dallas, if your being sarcastic, well then the hell with you, because in reality the super sharp cutoff will benefit other drivers....unless I hit a dip in the road then they'll be sorry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.