Frankzao Posted August 5, 2012 Report Share Posted August 5, 2012 I stick with the resonator first. Am looking for performance not sound Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 6, 2012 Author Report Share Posted August 6, 2012 well, a resonator won't make a huge difference, but none equals more power. Look at it this way, its much cheaper and easier to just have a single piece of pipe bent and installed - then if you don't like it cut out a section and insert one. Cheaper and easier then having an exhaust shop weld 2 pipes together and the res then remove later and reweld new piece in Quote Link to comment Share on other sites More sharing options...
Frankzao Posted August 8, 2012 Report Share Posted August 8, 2012 well too late....... rumble rumble......why have I not done this before? Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 10, 2012 Author Report Share Posted August 10, 2012 That would be a damn good question, why didn't you? What did it run you? I see you went with a magnaflow which is 1/4th-1/10th the cost of a remus, but wondering how much custom bending is now/ Mandrel? SS? Quote Link to comment Share on other sites More sharing options...
Frankzao Posted August 10, 2012 Report Share Posted August 10, 2012 $350 - $400 Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 11, 2012 Author Report Share Posted August 11, 2012 not too bad Quote Link to comment Share on other sites More sharing options...
Frankzao Posted August 11, 2012 Report Share Posted August 11, 2012 that part was pretty good Quote Link to comment Share on other sites More sharing options...
latinopikachu Posted October 21, 2012 Report Share Posted October 21, 2012 i want a CAI damn it.... my new charger is loud and proud and i want to hear it SING Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted October 22, 2012 Author Report Share Posted October 22, 2012 It would be possible to build your own, you'll simply need a 3" pipe, 1 90 degree coupler, about 12 or 15" of pipe then an 90' bend. All you need to do is drill a hole in the pipe, can't remember what size but just go and buy the proper size drill bit and your good to go. You could easily do it since all the engineering has been done. From intake manifold 90' coupler MAF L pipe filter 4 clamps Quote Link to comment Share on other sites More sharing options...
Frankzao Posted October 23, 2012 Report Share Posted October 23, 2012 I can take pics if you need..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.