Jump to content

V-leds Triton V3 Led Bulb


Troutman
 Share

Recommended Posts

Mine arrived a few days ago and were installed after a bit of mucking about.

 

http://www.youtube.com/watch?v=yJ0xI8qdUEI

 

IPB Image

 

There have been some cars where there isn't enough room to fit the bulb through the hole, but I had no such problems on my car. On the downside, the cost is heavy at $100 just for the bulbs, and the wiring is almost hair-thin and fragile. If using the 1156 adaptor, one pin would need to be ground as the cars use 1156a (offset pin).

 

Performance is excellent as expected. I will seriously consider doing the front turn signals, though that will be more challenging as I'd need to remove the front bar to access it.

Link to comment
Share on other sites

  • 3 months later...

But they still don't really provide the same light output as halogens. For brake lights its more about the difference between high and low. For this I use them.

 

In the Millenia I do indeed have LED reverse lights, but since it's not needed its just for show. Jeep on the other hand with no backup camera and usually being parked in the dark I have higher wattage reverse lights

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...