Owner
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Owner
-
-
so i finally received the replacements for the defective set. installed them and were impressed. these fogs match my sylvannia cool blue bulbs perfectly, albeit I am running the high beam bulbs in the low beam housing. much better than silverstars IMO.
-
i've e-mailed the company. they will be sending a replacement set of bulbs free of charge. But I do have to send back my old set to them once I receive the replacements. I'll have to pay shipping for that.
-
I paid $37.00 for the set. Shipping is free.
-
Owner -
I have the philips prem bulbs (no blue coating) but I can tell you that is a bad coating, or by chance did you touch the raw bulb with your fingers? Sometimes a finger print and the oil that creates them can do this. I would email the company, say you have one defective bulb and see if they'll ship you a new one. Or simply buy a single replacement and make sure to take a terry cloth (or just a rag really) and wipe the glass area of the bulb to make sure its clean.
I didn't touch the raw bulb with my fingers, not even with my gloves. I was extremely careful with them cause I knew if I ruined one, it would take at least a week or so to get a replacement (can't get these bulbs in US).
I've e-mailed the company.
-
So I purchased a set of Phillips VisionPlus H3 bulbs for my fog lights. Purchased them from autolamps-online.com (shipped from UK). I installed them and turned on the lights. I was very dissappointed as one of them was yellow (more yellow than stock bulbs) and the other was a nice bright white (better than Silverstars IMHO). I wondered why there was a huge discrepancy in color between them. I took out the bulbs to compare them and this is what I found: one of them turned yellow?
How it's supposed to look like:
What do you think happened to it? I was wearing gloves when I installed it and was very careful. It did not get into contact with water either. Do you think it's just defective?
By the way, the color change is inside the bulb.
-
I e-mailed Raxles for a quote, here is their reply:
--------------------
Thank you for you inquiry!
The axles for your 1998 Millenia 2.3 S are $119.95 for the driver side and
$119.95 for the passenger side.
We have them in stock. Please keep in mind when comparing prices
that at Raxles we use NEW joints on all of our axles. (Also
industry exclusive)(See our website www.raxles.com/nogrind.htm
for further elaboration on this important fact).
We build these out of HD NEW components using Amsoil synthetic grease, new
nuts, cotter pins,
and the BEST CV boots.
We charge no core charge "up front" and we provide a UPS ARS pre-paid return
label to return your cores...
---------------------
Does this seem expensive? Can't I get a new one from Mazda for about the same price? And for the guys that have gotten axles from Raxles, how much were you quoted?
Phillips VisionPlus H3 Bulbs
in Millenia / Eunos 800 / Xedos9
Posted
no, they didn't. i did have to pay for the return shipping though.