mts
-
Posts
38,258 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by mts
-
-
Oh I know.... hippie based generators on the braking system to scavenge energy losses
Oh I know.... hippie based generators on the braking system to scavenge energy losses
-
Did you do some gay-ass under lighting?
-
Motor bearing?
-
+1 can vouch for that, even looked at his VIN during the international Kentucky meet
-
From the driver's seat... all should be auto up and down.
-
I haven't spoke with Miller in some time.... thanks for reminding me to call. I know he is sporting a white Mazda3 now....
More pics
Just won Car of the Month at fordfusionclub.com for August.
-
Not really.... more load on the dry old seals when dragging down.
Header should read.... BHR makes noise when going down. Ask Lat
-
EXCELLENT, it is about time a country had the nuts to stand up to senility.
-
Rusting away, in it's bag, in solitude.
-
I will keep driving my Ford.... thanks.
-
-
An amalgamation of BHResque rants.... way to go Trout.
-
MEH, all the thunder of a sunny day....
-
-
http://toronto.kijiji.ca/c-cars-vehicles-a...QAdIdZ197684487
Shipping would be extra of course.... these are all prices for pick up.
-
You should not be using HID in the fogs, they make any car look very cheap and ricery, even with proper 4300k's used.
Any ballast should be screwed down, double sided tape just doesn't do it.
Good to see your are still more opinionated than useful. If you cannot help, you should STFU.
-
1.8T is much more spirited and fun that that cumbersome 2.8....
-
If it threw a rod, it would not even be running..... more likely something like plugs, fouled cat(s), plugged EGR, gummed up solenoids...
-
Old school....
-
Something adjustable... for fine tuning.
-
There are more lines, the gaskets are metal and can be re-used unless cracked ( I used Permatex Aviation Gasket to better the chances of re-sealing). Be prudent of silicone lines, as they tend to be too soft for the vacuum and heat, and end of sucking flat and causing MANY CEL's. And maybe limp mode if you lose function of the ABV due to vacuum loss, not the CEL.
-
If you recently worked on vacuum hoses, you have something placed wrong. Go over the vacuum system with a fine toothed comb and find the line that is misplaced.
And once again, BHR knows fuck all and should shut his piehole.
And I KNOW IT GOES INTO SAFE MODE, but NOT from a CEL you stupid fuck. It needs a more drastic issue than a basic CEL. You should learn more before opening your mouth for anything more than eating.
-
No Sir.... mah burro is white
-
Im the one with Miller Time in my sig... Still not catchng on. Unless you actually talking about drinking *Reference banned from MW*.
Ah yes, but you are NOT Miller Time....
Tyres
in Millenia / Eunos 800 / Xedos9
Posted
Now that was squeezing a tire on a rim