Jump to content
  • Announcements

    • Synesthesia

      Online source for ALL Mazda OEM parts.

      Original posted by "Anubis"   HAH! forget millenia. it has it for every mazda ever made. (well most )   here is the website:   http://www.trademotion.com/partlocator/ind...p;siteid=214264   enjoy guys.   *Administrative pin - Synesthesia
Sign in to follow this  

Programming Remote Keyless Fobs

Recommended Posts

Open drivers door and leave open.
Lock and unlock the drivers door using the power door lock switch on the door.
Insert key into the ignition.
Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position)
Do this 3 times within 10 seconds. Leave key in the ignition
Open and close the drivers door 3 times. (Door should be left open after this step)
ECU should respond by locking and unlocking the doors.
Press any button on remote #1. ECU responds by locking and unlocking the car doors.
Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
When you're done, remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this