Mixedatlboi Posted January 24, 2008 Report Share Posted January 24, 2008 Does any one kno how to make the blinkers flash when you hit the unlock/lock button? Right now it only makes a chirp noise from the horn but i really want it to flash Is that even possible? Quote Link to comment Share on other sites More sharing options...
mts Posted January 24, 2008 Report Share Posted January 24, 2008 It only chirps when pushing the lock button twice, no? To make the lights flash, you would have to run wires.... not sure where the outputs are for the alarm... you need to find the wiring diagrams. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted January 24, 2008 Report Share Posted January 24, 2008 in factory trim all it does is lock the doors, and chirp if you hit lock twice. I personally like this much better, it doesn't need to draw attention to itself "hey look at me, I'm unlock and no ones in the car" The stealth approach is much better Quote Link to comment Share on other sites More sharing options...
Renboy Posted January 24, 2008 Report Share Posted January 24, 2008 You need a wiring diagram before you start, but it wouldn't be that hard to do. Either reroute the signal (going to horn) wire to the flasher relay and splice it there so it would hit both signals, not just one. Or, if you want to keep the chirp, splice the signal wire and do the same as above. Quote Link to comment Share on other sites More sharing options...
Mixedatlboi Posted January 24, 2008 Author Report Share Posted January 24, 2008 omg i would not kno how to do that ..lol.. but to BHRpowered i have a habit of forgetting to lock my car and when i do remember i am in my room and sometimes i cant hear it so if i saw it flash it would be easier instead of me having to go all the way outside to hear it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.