Jump to content

Injector Cleaning Group Buy


Recommended Posts

Hey guys we are trying to clean our injectors. One member in .org has the setup and knowledge to do it properly and looking for people to chime in.

 

If you have a high mileage Milly you should join. The cost is effectively zero since you probably will have an mpg increase that will offset the initial cost of cleaning in a short time.

 

 

https://www.google.com/#hl=en&output=se...599&bih=789

Link to comment
Share on other sites

Why do we need a group buy for injector cleaning? All you really need is to get them out and 3 dollars of cleaner

 

It is too complicated for DIY. Doesnt worth the whole time and investment. You need a fuel rail, a pulser to pulse the injectors at different speed, ultrasonic bath, and a system to accurately measure the flaw rate before and after. Then you need a lot of injectors that you can group according to flaw rates closely thus the variation in a set is minimum.

 

A member recently did that and he had 8% variation among injectors before! (@ 135k miles). That means some good injectors has to inject more fuel to make the lazy injector's cylinder happy. Some will run rich and some will be lean. Not good for mpg and performance.

 

 

IPB Image

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...