///BHRpowered Posted August 8, 2007 Report Share Posted August 8, 2007 street, like I said, go with the rev3, that way you can slap it on now, and have the option to upgrade later Quote Link to comment Share on other sites More sharing options...
mattlau89 Posted August 8, 2007 Report Share Posted August 8, 2007 yea but my parents are gay. Quote Link to comment Share on other sites More sharing options...
ing-schu@online.no Posted August 8, 2007 Report Share Posted August 8, 2007 You are right i should do something before it totally rusts there. Anybody did an antirust job? I may consider a DIY-project. Ziebart quoted me $200 for underbody cleaning and protection. Being a broke student for sometime i never had the funding for that.. Â I considered spraying wd40 kind of stuff all underneath it may slows down at least.. Â Â My exhaust broke there as well, a friend of mine welded it back in place. He was so thrilled when I asked him, was he to weld on my car He drives a 87 Volvo 245. Â I would strongly advice you to do a sandblast, acid primer and antirust treatment under your car... Â WD40 is gone after the first wet road trip. Proffesional antirust treatment is good, but they will certainly not take the bother with sandblast and acid primer. It is a messy but easy job to do once you've got the gear. And then have it treated. I should like to add that the rust you don't see is more dangerous, inside doors, wheelarches and other places daylight doesn't reach. Have them treated as well, strongly recommended if you plan to keep your car. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 8, 2007 Report Share Posted August 8, 2007 I agree, and I inspect often, the millenia seems ot be quite well protected though. Â Quote Link to comment Share on other sites More sharing options...
street3890 Posted August 8, 2007 Report Share Posted August 8, 2007 Dam that sucks, but yea i'll prob. go with the square angled rev3 muffler and upgrade later on!!! Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 8, 2007 Report Share Posted August 8, 2007 damn straight Quote Link to comment Share on other sites More sharing options...
street3890 Posted August 11, 2007 Report Share Posted August 11, 2007 BHR, how much did you pay for your 2.5 piping and muffler? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.