mat@RemusExhaustShop.com Posted March 14, 2007 Report Share Posted March 14, 2007 AutoAccessoryStore gets their Remus from the same importer that we do, MimoUSA. The different is the twin angled listed on both AutoAccessoryStore and our website is in 2.25' inlet We are offering a Rev3 twin angled round tips specialy ordered. The second picture shown is just for can sizing references, do not take into account the tip shown on that picture. Link to comment Share on other sites More sharing options...
mattlau89 Posted March 14, 2007 Report Share Posted March 14, 2007 o ok what is different about the rev3. Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 14, 2007 Report Share Posted March 14, 2007 Rev3 is a stepped inlet design that comes in 2' 2.25' and 2.5' inlet. You trim to your desired size. Link to comment Share on other sites More sharing options...
Dallasaurora Posted March 14, 2007 Report Share Posted March 14, 2007 What about UK customers ? Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 14, 2007 Report Share Posted March 14, 2007 Our shipping charges to International are very high, we highly recommend you try to find your own shipping method if you can. Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted March 14, 2007 Report Share Posted March 14, 2007 http://www.remus.at/car.jpg 3rd from the left..2nd row Ist that the twin round and angled tip you were referring to? You could do what you just said, but the interior piping would still be 2.25' so the decrease in backpressure would be reduced. mat, i was interested in the tip at the fifth row first one from the left. but i cant find it anywhere. can u provide a link with that? Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 14, 2007 Report Share Posted March 14, 2007 Racing Stainless steel edition with one big oval tip? 300 shipped The titanium version with burned tips is 315 shipped Those racing edition are a bit louder than the usual sport exhausts. Link to comment Share on other sites More sharing options...
ChiTown Posted March 14, 2007 Report Share Posted March 14, 2007 http://www.remus.at/car.jpg first row, second from left. what is this one called, does it have a 2.5" inlet? i want this one for my new milly. Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 14, 2007 Report Share Posted March 14, 2007 Twin angled, comes in 2.25 inlet Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted March 15, 2007 Report Share Posted March 15, 2007 does the one i asked for come in a 2.5? and how loud are we talking about here? Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 15, 2007 Report Share Posted March 15, 2007 2.25, it's significantly louder, we usually fit those exhausts on more "tuner" oriented cars. Link to comment Share on other sites More sharing options...
mattlau89 Posted March 15, 2007 Report Share Posted March 15, 2007 arrite cool im in for buying one to make that nine.. who else wants to buy it? Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 15, 2007 Report Share Posted March 15, 2007 1:02millenia 2: 3: 4: 5: 6: 7: 8: 9: 10: Link to comment Share on other sites More sharing options...
ChiTown Posted March 15, 2007 Report Share Posted March 15, 2007 2.25, it's significantly louder, we usually fit those exhausts on more "tuner" oriented cars. exactly what the milly is not, i excuse your ignorance. I want more high end, i have a supercharger and a low reving high tork miller cycle for the low end, i think i may just have to get the twin 02 like the old 95milly...hmmm. Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 15, 2007 Report Share Posted March 15, 2007 338.90 + 25 Link to comment Share on other sites More sharing options...
///BHRpowered Posted March 16, 2007 Author Report Share Posted March 16, 2007 BHR, what size is yours and what are you going to do with it if you get a new one? And for the love of god, would finally go out and buy a better camera. Ren, those pictures were taken by malice, your not going to get much better then that, also, the tip size is 3.3 each I believe, together they fit quite nicely in the stock opening. If I can get a new muffler with a 2.5 already there I would sell the exhaust I have now, its been cared for by me and only about 2 years old, I could get the piping put back on so it would be a direct bolt on for millenia's, 250 probably + shipping MTS - I can't stand the non angled tips, completely interfers with the bodylines on almost all cars. The tiwn round angled are the way I roll Ok we can do twin round angled tip with Rev3 (2,5' inlet) but we need 10 orders. 342.18 + 25 Shipping Not sure if there's enough people on this board to make it happen though, the 2.5 requires a custom exhaust, GREAT for power, but hard on the pocket books of same, Any idea what the price would be for a single order, or is that not even possible, hell if you do it inhouse I would be willing to ship mine for a conversion so to speak. 10 people for the regular would be possible Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 16, 2007 Report Share Posted March 16, 2007 It's custom made in Austria. Sorry we need 10 orders to make it a Rev3. We can do 10 orders for 2.25 regular twin round angled though. Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 16, 2007 Report Share Posted March 16, 2007 10 people on this board? Link to comment Share on other sites More sharing options...
Frankzao Posted March 16, 2007 Report Share Posted March 16, 2007 Link to comment Share on other sites More sharing options...
mohamedeladawy@hotmail.com Posted March 16, 2007 Report Share Posted March 16, 2007 but i want 2.5 Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 16, 2007 Report Share Posted March 16, 2007 Twin Round Angled Rev3 (2,5" inlet) 10 orders needed 342.18 + 25 Shipping 1:02millenia 2: 3: 4: 5: 6: 7: 8: 9: 10: If you know any other forum where this might be of interest, I highly recommend you suggest this GB over there, the more the better:) Link to comment Share on other sites More sharing options...
///BHRpowered Posted March 16, 2007 Author Report Share Posted March 16, 2007 well put me on the list, but I'm not about 10 people, the problem is the millenia is a rare car to begin with, and L owners can do just fine by the 2.25 and S owners who don't care about power can get away with 2.25 with no problem. The S model of course is supercharged so the bigger the outlet the better Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 16, 2007 Report Share Posted March 16, 2007 I highly suggest you take a look at alternative tip styles. The Twin 02 Rev3 is VERY similar to the twin round angled. Link to comment Share on other sites More sharing options...
///BHRpowered Posted March 17, 2007 Author Report Share Posted March 17, 2007 I don't recall if the twin 02 comes angled, but your talking to a guy that keeps his millenia in a climate controlled garage and still puts it inside a carcapsule bubble and isn't driven from thanksgiving until march, Only the best. The biggest thing is being angled, the flat tips just look cheap to me for some reason Link to comment Share on other sites More sharing options...
mat@RemusExhaustShop.com Posted March 17, 2007 Report Share Posted March 17, 2007 Our only angled muffler is the Twin Angled but it's in 2.25 inlet. Link to comment Share on other sites More sharing options...
Recommended Posts