latinopikachu Posted July 10, 2008 Report Share Posted July 10, 2008 Can anyone tell me what cars have a windshield nozzle that "sprays" and makes a "mist" type spray instead of has a "stream" like the millenia's? Quote Link to comment Share on other sites More sharing options...
mts Posted July 10, 2008 Report Share Posted July 10, 2008 New 300C have a mister sprayer Quote Link to comment Share on other sites More sharing options...
enginph Posted July 10, 2008 Report Share Posted July 10, 2008 07 civic has. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted July 10, 2008 Report Share Posted July 10, 2008 I always found the windshield sprayers on the millenia quite lacking, good thing I never need them the sprayers on my Jeep on the other hand, those things are something else, large spray that blankets almost the entire windshield. Then again I guess it has to be designed for that for thick mud etc http://www.youtube.com/watch?v=tV78VHmJnIk Quote Link to comment Share on other sites More sharing options...
SteveSter Posted July 10, 2008 Report Share Posted July 10, 2008 Yea I have asked this question before, the sprayers on the milly suck, I spent an hour aiming them when I got the car but they still suck. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted July 10, 2008 Report Share Posted July 10, 2008 They could be replaced easy enough Quote Link to comment Share on other sites More sharing options...
enginph Posted July 10, 2008 Report Share Posted July 10, 2008 Buy the ones with blue LEDs Quote Link to comment Share on other sites More sharing options...
Frankzao Posted July 10, 2008 Report Share Posted July 10, 2008 Quote Link to comment Share on other sites More sharing options...
latinopikachu Posted July 11, 2008 Author Report Share Posted July 11, 2008 a project is in the works Quote Link to comment Share on other sites More sharing options...
mts Posted July 11, 2008 Report Share Posted July 11, 2008 Get your phone console? Quote Link to comment Share on other sites More sharing options...
enginph Posted July 11, 2008 Report Share Posted July 11, 2008 seriously if anybodu finds nozzles let us know. It should be a cheap upgrade. Pls dont tell me it is rice.. Quote Link to comment Share on other sites More sharing options...
cuto Posted July 11, 2008 Report Share Posted July 11, 2008 seriously if anybodu finds nozzles let us know. It should be a cheap upgrade. Pls dont tell me it is rice.. Mmmmm...i think thats ---- (cereal). Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted July 11, 2008 Report Share Posted July 11, 2008 if you get LED's ones its hella rice. There simply to change out, go underneath the hood, disconnect line, pop it off, put new one in, connect line, spray alittle bit and your done I would personally go with some from a grand cherokee or other jeep, there high volume and give a very wide range of spray to cover almost the entire windshield, not like the crappy millenia ones that just put out 2 lines Quote Link to comment Share on other sites More sharing options...
SteveSter Posted July 11, 2008 Report Share Posted July 11, 2008 Can someone please give me the part # for the distributor O-ring? Thanks Quote Link to comment Share on other sites More sharing options...
cuto Posted July 11, 2008 Report Share Posted July 11, 2008 Can someone please give me the part # for the distributor O-ring? Thanks U mean the gasket? http://www.japancars.ru/cat/mazda/index.ph...E2&blk=1820 or here http://www.japancars.ru/cat/mazda/index.ph...E2&blk=1325 Quote Link to comment Share on other sites More sharing options...
SteveSter Posted July 11, 2008 Report Share Posted July 11, 2008 Thanks, but no thats not it, the O-ring goes behind the distributor atteched to the engine, mine is leaking oil as well as one of my valve cover gaskets and I think its time I take car of this problem. I asked Mazda and as usual they didnt know what I was talking about so they told me to get the part #. Quote Link to comment Share on other sites More sharing options...
cuto Posted July 11, 2008 Report Share Posted July 11, 2008 Thanks, but no thats not it, the O-ring goes behind the distributor atteched to the engine, mine is leaking oil as well as one of my valve cover gaskets and I think its time I take car of this problem. I asked Mazda and as usual they didnt know what I was talking about so they told me to get the part #. Did you check the second link? Anyway, i'm sure its on the EPC. Quote Link to comment Share on other sites More sharing options...
latinopikachu Posted July 12, 2008 Author Report Share Posted July 12, 2008 :shifty: :shifty: Quote Link to comment Share on other sites More sharing options...
Troutman Posted July 12, 2008 Report Share Posted July 12, 2008 :don::don: Quote Link to comment Share on other sites More sharing options...
MazdaMomma Posted July 21, 2008 Report Share Posted July 21, 2008 seriously if anybodu finds nozzles let us know. It should be a cheap upgrade. Pls dont tell me it is rice.. Mmmmm...i think thats ---- (cereal). nice reply Cuto... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.