///BHRpowered Posted July 30, 2007 Report Share Posted July 30, 2007 again, these aren't rice forums. remus is a universal muffler, they would have to custom make all the piping. again, these aren't ricer cars. the cars systems consists of a set of headers, pre-cats off each, piping, a cat, more piping and the muffler. I don't like to give away all my secerts, tell them you want a high flow cat, and 2.5" piping from the new cat back, then put on the remus muffler. Quote Link to comment Share on other sites More sharing options...
Kat_Daddy Posted July 30, 2007 Report Share Posted July 30, 2007 dyno sheet would be appropriate here... Quote Link to comment Share on other sites More sharing options...
Jdubs99 Posted July 31, 2007 Report Share Posted July 31, 2007 I guess the precats are part of the midpipe? I wonder how restrictive the 2-into-1 is. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted July 31, 2007 Report Share Posted July 31, 2007 I'm not sure how restrictive the precats are, probably not nearly as much as the main cat. I have looked into doing something fully custom from the block back, but the heades alone would be crazy pricey. kat, now that my intake is on, I will be finishing up 1 thing, maybe redoing the chip, then a full dyno Quote Link to comment Share on other sites More sharing options...
street3890 Posted July 31, 2007 Report Share Posted July 31, 2007 I just got the intake today, looks sweet, can't wait for saturday morning installation!!! My Webpage Quote Link to comment Share on other sites More sharing options...
Frankzao Posted July 31, 2007 Report Share Posted July 31, 2007 AFTER ALL THAT WHINING YOU ARE GOING TO WAIT?!?!?! Quote Link to comment Share on other sites More sharing options...
street3890 Posted July 31, 2007 Report Share Posted July 31, 2007 lol i have to wait for my dad, he's to busy during the week because he's working on my house when he comes home from work!!! But i'll make sound clips when i put it in!!! Quote Link to comment Share on other sites More sharing options...
Dallasaurora Posted July 31, 2007 Report Share Posted July 31, 2007 Had a good look at MTS' and took pics at the meet. Also bought a good K & N filter in preparation. Will get one asap. How much was it ? Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 indeed, I'm wondering what pics dallas and xedosman will post, I know xedos got some good ones of me on the highway Quote Link to comment Share on other sites More sharing options...
Mase64 Posted August 1, 2007 Report Share Posted August 1, 2007 Wooooooooooooooot mine arrived... !!!! came home from work.. like 6 boxes.. Awaiting for me.. like Christmas. woot Thanx Chi!!! Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 bah, humbug. Quote Link to comment Share on other sites More sharing options...
Frankzao Posted August 1, 2007 Report Share Posted August 1, 2007 mase Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 GET IT ON..... Since putting on the K&N at the meet, the sound is a little richer... BUT in the journey home one thing noticed.... my mileage was actually better, albeit only about 5-10% better. But I got 650kms on the way to Montreal and still had 6.5 litres in the tank. Where before on the same drive with the same weather conditions, I would get 600kms and have about 6 litres left.... SO The CAI has an effect. Because I even kept the cruise set at 135 km/h (85 mph) with the air on ECON. Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 mine is on, I haven't driven around et, the millenia must rest from its journey, but its on. I painted the couplers black, didn't come out how I would like, found some on ebay, like 25 bucks shipped for both Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 While you have the paint out.... get rid of the brush strokes on your coolant tank.... Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 nope, I like it, semi brushed alum look. Besides, you know how hard it was just to get paint to stick to that damn smooth plastic that expands all the time? Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 Sand it first.... with 800 grit... not a problem after that..... and brushed aluminum does not mean paint brush streaks.... Quote Link to comment Share on other sites More sharing options...
excluesiveonez Posted August 1, 2007 Report Share Posted August 1, 2007 hahahhahahahahahaaaaaaaaaaaahaahahahahahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa i cvant stop laughing hhhhhhhhhhaaaaaaaahahahahahahaaaaaa Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 may sand, I would like my intake piping to be brushed alum I suppose I could just sand in straight lines Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 Take all of your intake piping off and get a wire wheel on an angle grinder, it will clean it to a sparkling finish.... Quote Link to comment Share on other sites More sharing options...
excluesiveonez Posted August 1, 2007 Report Share Posted August 1, 2007 please dont do any more brush strokes bhr Quote Link to comment Share on other sites More sharing options...
mts Posted August 1, 2007 Report Share Posted August 1, 2007 Bahahaha.... get him Clue Quote Link to comment Share on other sites More sharing options...
///BHRpowered Posted August 1, 2007 Report Share Posted August 1, 2007 I like the black couplers with silver piping, but a true brushed alum would be nice Quote Link to comment Share on other sites More sharing options...
Mase64 Posted August 1, 2007 Report Share Posted August 1, 2007 lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.